Dunlop MXR Tom Morello Power 50

    0 out of 5
    Not reviewed
    Add a Review

    146.20

    For more than 30 years, the key component of Tom Morello’s raw, hard-hitting sonic voice has been his amp setup. The MXR Power 50 Overdrive captures the sound and functionality of that setup for use with any rig, whether you have a simple combo amp or a high-end custom stack.

    • MXR

    3 in stock

    Product No. 06BDUN-TBM1

    TBM1 MXR® TOM MORELLO POWER 50™ OVERDRIVE

    For more than 30 years, the key component of Tom Morello’s raw, hard-hitting sonic voice has been his amp setup. The MXR Power 50 Overdrive captures the sound and functionality of that setup for use with any rig, whether you have a simple combo amp or a high-end custom stack. A faithful recreation of Tom Morello’s raw, hard-hitting sound in pedal form • Amp-like performance and huge, wicked tones thanks to MOSFET technology. Dial in Tom’s exact settings with exact same control interface . FX loop offers harmonically rich path for unique FX colouring. Perfect complement to the Cry Baby Tom Morello Wah

     

    THE LONG STORY

    For more than 30 years, the key component of Tom Morello’s raw, hard-hitting sonic voice has been his amp setup. The MXR Power 50 Overdrive captures the sound and functionality of that setup for use with any rig, whether you have a simple combo amp or a high-end custom stack.


     

    AUTHENTIC AMP TONES RECREATED FROM THE GROUND UP.

    The circuitry of the Power 50 Overdrive uses MOSFET technology to recreate the preamp stages of Tom’s amplifier for amp-like performance that’s uncanny in its ability to reproduce those big, gnarly tones. Tom relies solely on his amplifier for his signature distortion tones, and when you step on the Power 50 Overdrive, you’ll understand why.


     

    A FULL RANGE OF CONTROLS TAKEN RIGHT FROM THE AMP.

    The Power 50 Overdrive is fitted with the same control interface as Tom’s amp, featuring Gain, Bass, Middle, Treble, Volume, and Presence knobs so that you can replicate his exact settings or tune the sound to your own taste.

     

    GET IN THE LOOP.

    Tom runs all of his effects pedals through his amp’s FX loop, giving his signal chain a unique tonal twist. The Power 50 Overdrive recreates this same feature, too, so that you can give your signal chain that same character. Its own FX loop taps into the raw signal-clipping point prior to the Presence control and the custom tone-shaping at the output.

    If you have the Cry Baby® Tom Morello Wah, this is where you can nail Tom’s wah tone. Slip it into the harmonically rich loop, and start riding that rocker pedal to recreate his aggressive yet tonally balanced voice-like sweeps. Running the Cry Baby Wah before the Power 50 Overdrive will produce an overall more subtle wah effect, while running it after the Power 50 Overdrive will give you a very pronounced high-end response when you hit the toe-down position.

    The FX loop is perfect for a live setup, too—if you keep the Power 50 Overdrive engaged for your “always on” sound and run your pedal chain through the loop, you don’t have to worry about tweaking levels for a bunch of different pedals every time you play a different bar or club. Just adjust the Power 50 Overdrive’s interface to accommodate venue acoustics.


     

    THE OUTSPOKEN VOICE OF A MODERN ICON.

    The MXR Tom Morello Power 50 Overdrive faithfully recreates one of the most iconic guitar tones of the modern rock ’n’ roll era. Tom used a half stack to hone that sound, and now, you can put it right on your pedalboard.

    “The Power 50 Overdrive emulates the amp setup that I’ve used since 1988,” he says. “I’ve made 21 studio albums, and that amp, that head, and that speaker, and that tone has been on 21 of them. It’s been my signature identifiable sound since Day One of my career. If you want to have the sound that has been on those records, you don’t need to find an amp and speaker cabinet from 1988. You can get that sound with the Power 50 Overdrive, no matter what your setup is.”

     

     

     

     

    Specifications

    Input Impedance 700 KΩ

    Output Impedance 900 kΩ

    Return Impedance 1 MΩ

    Send Impedance 10 KΩ

    Nominal Output Level* -12 dBV

    Maximum Output Level 0 dBV

    Nominal Send Level* -26 dBV

     

    Controls

    Bass +4 dB, -21 dB, 50 Hz

    Mid ±7 dB, 500 Hz

    Treble ±7 dB, 5 kHz

    Treble*** +7 dB, -21 dB, 5 kHz

    Presence +7 dB, 4 kHz

     

    Bypass True Hardwire

    Current Draw 12 mA

    Power Supply DC 9 volts

     

    You may also like…

    Fiona Walton

    Need Help Choosing?

    Get in touch with a member of our team

    Contact a member of our dedicated customer service team, and we will be happy to help you choose the right instrument for your needs.

    Or text “Waltons Callback” with a short description of your query and a member of staff will call you as soon as possible to assist.

    Can’t Get Through? Please see our list of contact numbers below

    Head Office: 01 8207425

    Blanchardstown Store: 01 9603232

    Online Sales, Customer Service & Product Queries: 

    Niall: 087 2267740

    Fiona: 086 0284929

    Fiona Walton
    Online Sales & Marketing Manager

    Customer Reviews

    Be the first to review this product

    Your email address will not be published. Required fields are marked *